If you do not have Adobe Acrobat, you can find it by clicking HERE and access the file below.

The Deskins Quick-Dry Filtration Process will properly complete liquid-solid separation and non-mechanical drying.   As the filter is poured, the liquid moves down through the filter and the solid remains on top.  Before the end of the pour, the solid will begin to dewater to the point of cracking.   After the biosolid has set on the filter for 3 to 7 days, the biosolid will be 40% to 60% dry depending upon the climate and season.   Once the biosolid is gathered from the filter, it can have many post separation processes applied depending upon the desired product.       You now have a dry dirt product compared to a lot of water.

The components for the Deskins Quick-Dry Filtration Process make liquid-solid separation easy.   The RapidFloc Mixer System     creates activated polymer, thoroughly and gently mixes  (portable unit) influent liquid until the liquid and solid streams are merely flowing together to the filter.  Once at the filter, the two streams separate rapidly and begin to Quick-Dry.  The AquaTrac Retrieval Machinery is specifically designed to not damage the filter.  The AquaTrac 300 Articulated Loader (not pictured) cleans the top of the filter without disturbing the top media at a rate of 3,500 square feet per hour with one person.  The AquaTrac 100 is a 100% Complete Retrieval System . Clearing up to 7,000 square feet per hour with one person without disturbing or collecting the top media, as well as preparing the filter for the next application.  The AquaTrac 200 works together with AquaTrac Articulated Dumpers to clear     over 44,000 square feet per hour with three people.

F. D. Deskins Company, Inc. strives to always meet the needs of wastewater and nutrient management operations.  From water treatment, animal waste, toxic clean-up, to iron hydroxides  , all chemical challenges have been completely overcome.

Ask for a Deskins Representative to Contact you  and visit a full scale installation.